Datasheet

PmodJSTK2™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 9 of 9
4 Pinout Description Table
A pinout table of the PmodJSTK2 is provided below.
Although users are welcome to create their own interface code for the PmodJSTK2 if they so desire, pre-
constructed libraries that provide functions for initializing the module, reading in values, and adjusting calibration
values exist. They are available on the PmodJSTK2 example code page.
Any external power applied to the PmodJSTK2 must be within 2.95V and 5.5V; however, it is recommended that
Pmod is operated at 3.3V.
5 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 1.875 inches long on the sides parallel to the pins
on the pin header, 0.9375-inch-long on the sides perpendicular to the pin header, and 1.75 inches tall. With the 3-
D printed housing the module is 1.875 inches long on the sides parallel to the pins on the pin header, 1.125 inches
long on the sides perpendicular to the pin header, and 1.75 inches tall.
Pin
Signal
Description
1
CS
Chip Select
2
MOSI
Master-Out-Slave-In
3
MISO
Master-In-Slave-Out
4
SCK
Serial Clock
5
GND
Power Supply Ground
6
VCC
Power Supply (3.3V/5V)