Datasheet
15. The code 38h is valid only for part numbers N25Q256A83ESF40x, N25Q256A83E1240x,
and N25Q256A83ESFA0F; the code 12h is valid for the other part numbers.
16. The WRITE ENABLE command must be issued first before this command can be execu-
ted. Not necessary for part numbers N25Q256A83ESF40x, N25Q256A83E1240x, and
N25Q256A83ESFA0F.
3V, 256Mb: Multiple I/O Serial Flash Memory
Command Definitions
09005aef84566603
n25q_256mb_65nm.pdf - Rev. W 11/16 EN
31
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.