Datasheet

Signal Assignments
Figure 2: 8-Lead, VDFPN8 – MLP8 (Top View)
1
2
3
4
8
7
6
5
S#
DQ1
W#/V
PP
/DQ2
V
SS
V
CC
HOLD#/DQ3
C
DQ0
Notes:
1. On the underside of the MLP8 package, there is an exposed central pad that is pulled
internally to V
SS
and must not be connected to any other voltage or signal line on the
PCB.
2. Reset functionality is available in devices with a dedicated part number. See Part Num-
ber Ordering Information for complete package names and details.
Figure 3: 16-Lead, Plastic Small Outline – SO16 (Top View)
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
C
DQ0
DNU
DNU
DNU
DNU
V
SS
W#/V
PP
/DQ2
HOLD#/DQ3
V
CC
RESET/DNU
2
DNU
DNU
DNU
S#
DQ1
Notes:
1. Reset functionality is available in devices with a dedicated part number. See Part Num-
ber Ordering Information for complete package names and details.
2. Pin 3 is DNU, except for the N25Q256A83ESF40x and N25Q256A83ESFA0F devices, where
it is used as RESET.
3V, 256Mb: Multiple I/O Serial Flash Memory
Signal Assignments
09005aef84566603
n25q_256mb_65nm.pdf - Rev. W 11/16 EN
8
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.