Datasheet

AC Characteristics and Operating Conditions
Table 42: AC Characteristics and Operating Conditions
Parameter Symbol Min Typ
1
Max Unit Notes
Clock frequency for all commands other than
READ (SPI-ER, QIO-SPI protocol)
f
C DC 108 MHz
Clock frequency for READ commands
f
R DC 54 MHz
Clock HIGH time
t
CH 4 ns 2
Clock LOW time
t
CL 4 ns 1
Clock rise time (peak-to-peak)
t
CLCH 0.1 V/ns 3, 4
Clock fall time (peak-to-peak)
t
CHCL 0.1 V/ns 3, 4
S# active setup time (relative to clock)
t
SLCH 4 ns
S# not active hold time (relative to clock)
t
CHSL 4 ns
Data in setup time
t
DVCH 2 ns
Data in hold time
t
CHDX 3 ns
S# active hold time (relative to clock)
t
CHSH 4 ns
S# not active setup time (relative to clock)
t
SHCH 4 ns
S# deselect time after a READ command
t
SHSL1 20 ns
S# deselect time after a nonREAD command
t
SHSL2 50 ns
Output disable time
t
SHQZ 8 ns 3
Clock LOW to output valid under 30pF STR
t
CLQV 7 ns
DTR 8 ns
Clock LOW to output valid under 10pF STR 5 ns
DTR 6 ns
Output hold time (clock LOW)
t
CLQX 1 ns
Output hold time (clock HIGH)
t
CHQX 1 ns
HOLD command setup time (relative to clock)
t
HLCH 4 ns
HOLD command hold time (relative to clock)
t
CHHH 4 ns
HOLD command setup time (relative to clock)
t
HHCH 4 ns
HOLD command hold time (relative to clock)
t
CHHL 4 ns
HOLD command to output Low-Z
t
HHQX 8 ns 3
HOLD command to output High-Z
t
HLQZ 8 ns 3
Write protect setup time
t
WHSL 20 ns 5
Write protect hold time
t
SHWL 100 ns 5
Enhanced V
PPH
HIGH to S# LOW for extended and
dual I/O page program
t
VPPHSL 200 ns 6
WRITE STATUS REGISTER cycle time
t
W 1.3 8 ms
Write NONVOLATILE CONFIGURATION REGISTER
cycle time
t
WNVCR 0.2 3 s
CLEAR FLAG STATUS REGISTER cycle time
t
CFSR 40 ns
3V, 256Mb: Multiple I/O Serial Flash Memory
AC Characteristics and Operating Conditions
09005aef84566603
n25q_256mb_65nm.pdf - Rev. W 11/16 EN
82
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.