Datasheet

Zynq-7000 All Programmable SoC (Z-7007S, Z-7012S, Z-7014S, Z-7010, Z-7015, and Z-7020)
DS187 (v1.19) October 3, 2016 www.xilinx.com
Product Specification 4
Table 3: DC Characteristics Over Recommended Operating Conditions
Symbol Description Min Typ
(1)
Max Units
V
DRINT
Data retention V
CCINT
voltage (below which configuration data might be lost) 0.75 – – V
V
DRI
Data retention V
CCAUX
voltage (below which configuration data might be lost) 1.5 – – V
I
REF
PS_DDR_VREF 0/1, PS_MIO_VREF, and V
REF
leakage current per pin – – 15 µA
I
L
Input or output leakage current per pin (sample-tested) – – 15 µA
C
IN
(2)
PL die input capacitance at the pad – – 8 pF
C
PIN
(2)
PS die input capacitance at the pad – – 8 pF
I
RPU
Pad pull-up (when selected) @ V
IN
=0V, V
CCO
= 3.3V 90 – 330 µA
Pad pull-up (when selected) @ V
IN
=0V, V
CCO
= 2.5V 68 – 250 µA
Pad pull-up (when selected) @ V
IN
=0V, V
CCO
= 1.8V 34 – 220 µA
Pad pull-up (when selected) @ V
IN
=0V, V
CCO
= 1.5V 23 – 150 µA
Pad pull-up (when selected) @ V
IN
=0V, V
CCO
= 1.2V 12 – 120 µA
I
RPD
Pad pull-down (when selected) @ V
IN
= 3.3V 68 – 330 µA
Pad pull-down (when selected) @ V
IN
= 1.8V 45 – 180 µA
I
CCADC
Analog supply current, analog circuits in powered up state – – 25 mA
I
BATT
(3)
Battery supply current – – 150 nA
R
IN_TERM
(4)
Thevenin equivalent resistance of programmable input termination to V
CCO
/2
(UNTUNED_SPLIT_40)
28 40 55 Ω
Thevenin equivalent resistance of programmable input termination to V
CCO
/2
(UNTUNED_SPLIT_50)
35 50 65 Ω
Thevenin equivalent resistance of programmable input termination to V
CCO
/2
(UNTUNED_SPLIT_60)
44 60 83 Ω
n Temperature diode ideality factor – 1.010 – –
r Temperature diode series resistance – 2 – Ω
Notes:
1. Typical values are specified at nominal voltage, 25°C.
2. This measurement represents the die capacitance at the pad, not including the package.
3. Maximum value specified for worst case process at 25°C.
4. Termination resistance to a V
CCO
/2 level.