Datasheet

Zynq-7000 All Programmable SoC (Z-7007S, Z-7012S, Z-7014S, Z-7010, Z-7015, and Z-7020)
DS187 (v1.19) October 3, 2016 www.xilinx.com
Product Specification 40
Input/Output Logic Switching Characteristics
RSDS_25 RSDS_25 100 0 0
(2)
0
TMDS_33 TMDS_33 50 0 0
(2)
3.3
Notes:
1. C
REF
is the capacitance of the probe, nominally 0 pF.
2. The value given is the differential output voltage.
Table 56: ILOGIC Switching Characteristics
Symbol Description
Speed Grade
Units
-3 -2 -1C/-1I/-1LI -1Q
Setup/Hold
T
ICE1CK
/
T
ICKCE1
CE1 pin setup/hold with respect to CLK 0.48/0.02 0.54/0.02 0.76/0.02 0.76/0.02 ns
T
ISRCK
/
T
ICKSR
SR pin setup/hold with respect to CLK 0.60/0.01 0.70/0.01 1.13/0.01 1.13/0.01 ns
T
IDOCK
/
T
IOCKD
D pin setup/hold with respect to CLK without Delay 0.01/0.27 0.01/0.29 0.01/0.33 0.01/0.33 ns
T
IDOCKD
/
T
IOCKDD
DDLY pin setup/hold with respect to CLK (using IDELAY) 0.02/0.27 0.02/0.29 0.02/0.33 0.02/0.33 ns
Combinatorial
T
IDI
D pin to O pin propagation delay, no Delay 0.11 0.11 0.13 0.13 ns
T
IDID
DDLY pin to O pin propagation delay (using IDELAY) 0.11 0.12 0.14 0.14 ns
Sequential Delays
T
IDLO
D pin to Q1 pin using flip-flop as a latch without Delay 0.41 0.44 0.51 0.51 ns
T
IDLOD
DDLY pin to Q1 pin using flip-flop as a latch (using
IDELAY)
0.41 0.44 0.51 0.51 ns
T
ICKQ
CLK to Q outputs 0.53 0.57 0.66 0.66 ns
T
RQ_ILOGIC
SR pin to OQ/TQ out 0.96 1.08 1.32 1.32 ns
T
GSRQ_ILOGIC
Global set/reset to Q outputs 7.60 7.60 10.51 10.51 ns
Set/Reset
T
RPW_ILOGIC
Minimum pulse width, SR inputs 0.61 0.72 0.72 0.72 ns, Min
Table 57: OLOGIC Switching Characteristics
Symbol Description
Speed Grade
Units
-3 -2 -1C/-1I/-1LI -1Q
Setup/Hold
T
ODCK
/
T
OCKD
D1/D2 pins setup/hold with respect to CLK 0.67/–0.11 0.71/–0.11 0.84/–0.11 0.84/–0.06 ns
T
OOCECK
/
T
OCKOCE
OCE pin setup/hold with respect to CLK 0.32/0.58 0.34/0.58 0.51/0.58 0.51/0.58 ns
T
OSRCK
/
T
OCKSR
SR pin setup/hold with respect to CLK 0.37/0.21 0.44/0.21 0.80/0.21 0.80/0.21 ns
T
OTCK
/
T
OCKT
T1/T2 pins setup/hold with respect to CLK 0.69/–0.14 0.73/–0.14 0.89/–0.14 0.89/–0.11 ns
Table 55: Output Delay Measurement Methodology (Cont’d)
Description I/O Standard Attribute
R
REF
(Ω)
C
REF
(1)
(pF)
V
MEAS
(V)
V
REF
(V)