Datasheet
Spartan-7 FPGAs Data Sheet: DC and AC Switching Characteristics
DS189 (v1.2) June 20, 2017 www.xilinx.com
Preliminary Product Specification 39
PLL_F
BANDWIDTH
Low PLL bandwidth at typical. 1.00 1.00 1.00 MHz
High PLL bandwidth at typical.
(1)
4.00 4.00 4.00 MHz
PLL_T
STATPHAOFFSET
Static phase offset of the PLL outputs.
(2)
0.12 0.12 0.12 ns
PLL_T
OUTJITTER
PLL output jitter. Note 3
PLL_T
OUTDUTY
PLL output clock duty-cycle precision.
(4)
0.20 0.20 0.20 ns
PLL_T
LOCKMAX
PLL maximum lock time. 100.00 100.00 100.00 µs
PLL_F
OUTMAX
PLL maximum output frequency. 800.00 800.00 800.00 MHz
PLL_F
OUTMIN
PLL minimum output frequency.
(5)
6.25 6.25 6.25 MHz
PLL_T
EXTFDVAR
External clock feedback variation. < 20% of clock input period or 1 ns Max
PLL_RST
MINPULSE
Minimum reset pulse width. 5.00 5.00 5.00 ns
PLL_F
PFDMAX
Maximum frequency at the phase
frequency detector.
500.00 450.00 450.00 MHz
PLL_F
PFDMIN
Minimum frequency at the phase frequency
detector.
19.00 19.00 19.00 MHz
PLL_T
FBDELAY
Maximum delay in the feedback path. 3 ns Max or one CLKIN cycle
Dynamic Reconfiguration Port (DRP) for PLL Before and After DCLK
T
PLLDCK_DADDR
/
T
PLLCKD_DADDR
Setup and hold of D address. 1.40/0.15 1.63/0.15 1.63/0.15 ns, Min
T
PLLDCK_DI
/
T
PLLCKD_DI
Setup and hold of D input. 1.40/0.15 1.63/0.15 1.63/0.15 ns, Min
T
PLLDCK_DEN
/
T
PLLCKD_DEN
Setup and hold of D enable. 1.97/0.00 2.29/0.00 2.29/0.00 ns, Min
T
PLLDCK_DWE
/
T
PLLCKD_DWE
Setup and hold of D write enable. 1.40/0.15 1.63/0.15 1.63/0.15 ns, Min
T
PLLCKO_DRDY
CLK to out of DRDY. 0.72 0.99 0.99 ns, Max
F
DCK
DCLK frequency. 200.00 200.00 200.00 MHz, Max
Notes:
1. The PLL does not filter typical spread-spectrum input clocks because they are usually far below the bandwidth filter frequencies.
2. The static offset is measured between any PLL outputs with identical phase.
3. Values for this parameter are available in the Clocking Wizard [Ref 7].
4. Includes global clock buffer.
5. Calculated as FVCO/128 assuming output duty cycle is 50%.
Table 38: PLL Specification
Symbol Description
V
CCINT
Operating Voltage and Speed
Grade
Units
1.0V 0.95V
-2 -1 -1L