Datasheet

You are here:: Digilent Documentation / Reference / Instrumentation / OpenLogger

/ OpenLogger Screw Terminal Adapter

The OpenLogger Screw Terminal Adapter is intended to be used with the Digilent OpenLogger to provide external

connections to the OpenLogger via screw terminal adapters for more readily accessible inputs. The Screw Terminal

Adapter connects directly on top of the OpenLogger to maintain a small form factor.

Standard Screw Terminal Adapters for easy connectivity

Designed to fit directly on top of the OpenLogger

The long side of the Screw Terminal Adapter for the Openlogger is 2.838 inches (72.1 mm) and the short side of the PCB is

2.2835 inches (58 mm) in length.

OpenLogger Screw Terminal Adapter

Features

Physical Dimensions

Functional Description

Digilent uses cookies to ensure you get the best experience on our websites. By using our site you agree to our use of cookies.

Got it!

Learn More

PAGE 1
Digilent uses cookies to ensure you get the best experience on our websites. By using our site you agree to our use of cookies. Learn More You are here:: Digilent Documentation / Reference / Instrumentation / OpenLogger / OpenLogger Screw Terminal Adapter Got it! OpenLogger Screw Terminal Adapter The OpenLogger Screw Terminal Adapter is intended to be used with the Digilent OpenLogger to provide external connections to the OpenLogger via screw terminal adapters for more readily accessible inputs.
PAGE 2
The OpenLogger Screw Terminal Adapter provides screw terminals for each analog input and each digital pin, with an analog ground pin to pair with each analog input. A screw terminal pair for the 5V power supply from the OpenLogger is available in the center of the board as well as additional headers for access to a few of the OpenLogger specific pins.