Datasheet

ManualsBrandsDIGILENT ManualsDev KitsAssortment box

myParts Kit from Texas Instruments: Companion Parts Kit for NI myDAQ

SKU: 6002-240-001

Product Description

Get your students quickly involved in building essential electronic circuits using myParts Kit supported by the

Texas Instruments

University Program.

The set of key components in the myParts Kit encourages hands-on experimentation with breadboards of basic

circuitry, helping to make learning productive and enjoyable for beginners and more advanced students alike.

Hobbyists and independent developers will also find the kit useful for investigating their design concepts.

The kit comes with a collection of parts that are the building blocks of all electronics, including op-amps, an

instrumentation amplifier, a comparator, voltage regulators, switching regulators, digital logic gates, timers,

temperature sensors, data converters, transistors, resistors, capacitors, LEDs, switches, a wiring kit and more.

myParts Kit enables your students to run experiments that help them understand real-life applications in areas

such as power management, audio amplification, spinning motors, light detection, signal conditioning, data

acquisition, and telecommunications to name a few. Projects that can be built with the kit include:

Inverting and non-inverting amplifiers

Filters

Voltage followers

Summary of content (5 pages)

PAGE 1
myParts Kit from Texas Instruments: Companion Parts Kit for NI myDAQ SKU: 6002-240-001 Product Description Get your students quickly involved in building essential electronic circuits using myParts Kit supported by the Texas Instruments® University Program. The set of key components in the myParts Kit encourages hands-on experimentation with breadboards of basic circuitry, helping to make learning productive and enjoyable for beginners and more advanced students alike.
PAGE 2
Regulators Signal conditioning Pulse-width modulated (PWM) signal generators Integrators Differentiators Light detectors Data converters ...and many others. Note: Fits well with other tools: The kit is a great complement to the NI myDAQ and ELVIS tools, as well as the Digilent Electronics Explorer Board, for hands-on learning both inside and outside of the lab. Students can use the simulation software that is already available in school to simulate results before building their circuits.
PAGE 3
NAND: quad 2 input (SN74LS00N) OR: quad 2 input (SN74LS32N) XOR: quad 2 input (SN74LS86N) NOR: quad 2 input (SN74LS02N) AND: quad 2 input (SN74LS08N) Inverter buffer/driver: SN74LS04N Hex Counter, 4-bit: SN74LS163N Dual JK flip-flop: SN74LS107AN D type dual flip-flop: SN74LS74N Decoder/encoder/mux: CD4511BE 3 to 8 decoder/demux: SN74LS138N 8 to 3 encoder: SN74LS148 Dual complementary pair/inverter: CD4007UB Timer: TLC555CP Converters: Freq to V converter: LM2917N/NOPB A/D converter, 12-bit: ADS7816P A/D con
PAGE 4
¼ W, 1.5 kΩ, ±5% ¼ W, 2.2 kΩ, ±5% ¼ W, 3.3 kΩ, ±5% ¼ W, 4.7 kΩ, ±5% ¼ W, 5.6 kΩ, ±5% ¼ W, 10 kΩ, ±5% ¼ W, 15 kΩ, ±5% ¼ W, 20 kΩ, ±5% ¼ W, 22 kΩ, ±5% ¼ W, 33 kΩ, ±5% ¼ W, 47 kΩ, ±5% ¼ W, 68 kΩ, ±5% ¼ W, 100 kΩ, ±5% ¼ W, 200 kΩ, ±5% ¼ W, 470 kΩ, ±5% ¼ W, 1 MΩ, ±5% ¼ W, 10 MΩ, ±5% Power Resistors: 10W, 6.8 Ω, ±5% Potentiometers: ¾ W, 1 kΩ, ±10%: 3006P-102 ¾ W, 10 kΩ, ±10%: 3006P-103 ¾ W, 100 kΩ, ±10%: 3006P-104 Ceramic Capacitors: 39 pF (x2) 100 pF (x2) 1 nF (x2) 2.2 nF (x2) 4.
PAGE 5
470 uF, 25V, ±20% (x2) Transistors: P-channel MOSFET (x4): ZVP2110A NPN transistor (x3): 2N3904L PNP transistor (x3): 2N3906L NPN bipolar power transistor: TIP31C PNP bipolar power transistor: TIP32C N-channel power MOSFET: IRF510 Compl. transistor pair: STD815CP40 or STD830CP40 Dual NPN high voltage transistors: STD845DN40 or STD840DN40 LEDs: Red (x2) Yellow (x2) Green (x2) Misc: Audio transformer Photocell buzzer Light sensor Wiring kit https://store.digilentinc.