Datasheet

High Current Adapter for NI myRIO

Part # 6002-410-012

Hide Details

Connector(s):

MXP Connector compatible with NI myRio

• Uses the myRIO Expansion Port (MXP) connector

• Supports 3V - 16V output voltage (external power supply required)

• 4 Open drain outputs

◦ Continuous current: 3.0A (25°C) / 2.2A (85°C)

◦ Peak output current: 4.1A (t<5s)

• 4 Standard 3 terminal relay outputs

◦ Common, Normally Closed, Normally Open

◦ Relay output max switching voltage: 30V

◦ Rated Current: 1A

• 34-pin female breakout allowing direct user access to signal pins

With the High Current Adapter, you can use your NI myRIO to interact with high current

applications such as driving LED Strips, relays, and servos.

(For motor applications, please see the myRIO Motor Adapter Board.)

The High Current Adapter is able to run applications from 3V-16V and can deliver current up

to 4A, providing users with a way to plug their applications in directly without any additional

electronics required.

201

htt

s://www.di

ilentinc.com/Products/Detail.cfm?NavPath=2,1269,1276&Prod=MYRIO...