Information

XUP USB-JTAG Programming Cable
Part # 6003-410-011P-KIT
Connector(s):
Micro USB
Xilinx 14-pin JTAG connector
• Compatible with Xilinx Platform Cable USB
• Supports 5V, 3.3V, 2.5V, 1.8V and 1.5V systems
• Compatible with Full-Speed and Hi-Speed USB ports
• Works with ChipScope, EDK, and System Generator
• Indirectly programs SPI and Parallel FLASH memory
devices
• Ships with the XUP Fly Wire Assembly
USB programming cable for all Xilinx devices
The XUP-USB programming
cable is compatible with Xilinx’s
Platform Cable USB. It can
directly program Xilinx FPGAs,
CPLDs, and programming
ROMs, and indirectly program
SPI and parallel Flash ROMs
with system voltages ranging from 1.5V to 5V. The cable is compatible with
full-speed and high-speed USB ports, and is directly accessed from ISE,
Chipscope, EDK, and other Xilinx CAD tools.
For more information, please see the Platform Cable USB datasheet,
available here.
NOTES:
• Xilinx iMPACT software is required for programming and
configuration.
• This cable is not needed for Digilent FPGA boards as our boards are
designed with this functionality natively.
Digilent, Inc. | P.O. Box 428 Pullman, WA 99163-0428 | [phone] (voice) [phone] (fax) | Contact us
8
/
25
/
201
5
htt
p
s://www.di
g
ilentinc.com/Products/Detail.cfm?Prod=XU
P
-US
B
-JTA
G