Product Guide

PRODUCT GUIDE
Mini/Standard/Hybrid Touch-Free RFID
|
Basic & Advanced
11
Phone: [phone]
www.digilock.com | [e-mail]
PG-D6VRX-DEN
042321
SUPPORT
BATTERY REPLACEMENT
It is not necessary to remove the lock from the door. In case of battery failure, operate with a valid Manager Key.
CAUTION: Risk of explosion or leakage if battery is replaced by an incorrect type, mixed with a different battery type, or inserted backwards. Replace
all batteries of a set at the same time. Be sure to insert batteries with correct polarities. Remove exhausted batteries from product promptly and
dispose of used batteries according to the battery manufacturer’s instructions.
Low Battery Indicator
After locking or unlocking, the lock emits two sets of three beeps indicating that the batteries are low. Replace the batteries.
Does Not Unlock with the User RFID Credential or User Key
The lock does not recognize the User RFID Credential or User Key. For immediate access, operate with a valid Manager Credential. If in
assigned use functionality, follow instructions to Assign User Credentials to assign a new User RFID Credential or User Key to the lock.
Does Not Operate with a Manager RFID Credential or Manager Key
The lock does not recognize the Manager Credential. Follow instructions to Add Manager Credentials to program the Manager
Credential to the lock. For immediate access, operate with another valid Manager Credential.
Does Not Operate with the Programming Key
The lock does not recognize the Programming Key. If the Programming Key has been replaced, operate with the Replacement
Programming Key. Contact Digilock support for additional assistance.
No Audible Feedback or LED when Hand is Presented to Lock
• The batteries may need to be replaced. For immediate access, operate with a valid Manager Key. If the error condition persists,
replace the batteries.
a Remove the screw and the battery cover.
b Replace the four premium AA batteries.
c Replace battery cover and screw.
a
b
c