Manual

13
Using the System
Setting the Time
It is highly recommended to set the time on the system prior to doing any recording.
NOTE: All recording must be stopped on the system in order to set the time.
To set the date and time:
1. Stop recording on the system by pressing / on the fr
ont panel, or pressing the button
on the remote control and enter your 6-digit system password (by default, 000000).
NOTE: If using the mouse, right-click and then click on the Virtual Remote.
2. Press the MENU butt
on to open the system menu. Select SYSTEM and press the ENTER
button. The System menu opens.
3. Select the TIME tab.
4.
Select DAT
E and enter the date (mm/dd/yyyy).
5. Select TIME and enter
the time (hh/mm/ss).
NOTE: If using the mouse, use the Virtual Keyboard to enter the date and time.
6. Press the ENTER butt
on to save your changes.
7. Press / on the fr
ont panel, or press the button on the remote control to resume
Continuous Recording.
NOTE: If using the mouse, right-click and then click on the Virtual Remote.
Figure 5.0 Time menu