Instruction Manual

104
iSMS Client (Remote Viewing on the Mac)
iSMS Client (Remote Viewing on the Mac)
The iSMS Client allows you to remotely connect and configure your DVR using the Safari browser
in Mac OSX 10.6.
System Requirements
Your system must meet or exceed the requirements below before installing the iSMS Client:
•
Operating System: Mac OSX 10.6 or later
•
CPU: Intel Core Duo series CPU or higher
•
Memory (RAM): 1024 GB
•
Video Card memory: 256 MB
•
Free Hard Drive space: 2GB
•
Video Resolution: 1024 x 768
Prerequisites
• Download the iSMS client from www.digimerge.com, under the DH230’s product page
• Port
80 (or whichever port your system is using) must be port forwarded to your router
• You must create a DDNS account, and have the DDNS settings configured in your DVR
• The DVR must have internet access
• You must have a Digimerge DDNS address to log in remotely
Installation Steps
To install the iSMS Client:
1. Double-click on the iSMS Client icon.
2. Follow the on-screen instructions to ins
tall the software. Enter your password 
when prompted to install the software.
Double-click to start
installation
Enter the admin password
when prompted