Instruction Manual

144
Appendix C:Digimerge Auto Port Forward Wizard
Step 2: Enter your router settings
1. Under the Router drop-down list, select the model of your router.
OR
• Click the Sear
ch button ( ) to enter the name of your router model.
NOTE: Cl
ick the Auto Detect button ( )if you have a Linksys or Netgear router (works with
most Linksys or Netgear models).
2. Under Router IP, click the De
tect Router IP button ( ).
• The router’s IP populates in the blank field. Click OK t
o exit the prompt.
3. Under Username and Password, enter
the router’s username and password.
• Optional: Under HTTP Type (default http://) and HTT
P Port (default, 80), you may have to
change the values depending on your router model. Consult your router manual for details.
4. Under IP, enter the IP address of your Digimerge device.
NOTE: The
IP is usually found in the information window of your DVR.
5. Under Po
rt, enter the DVR’s Web Port (by default, port 80).
6. Click Ne
xt to continue.
Search and Auto detect
button
Router drop-down list
Router IP
Router user name &
password
Enter port 80 under
Ports
Enable Silent Mode
Enter your Digimerge
device’s IP
Enter port
number