Instruction Manual

18
Using the System
Setting the Time
It is highly recommended to set the time on the system prior to doing any recording.
To set the date and time:
1. Stop recording on the system by pressing
 on the front panel, or press the  button on the
remote control and enter your 6-digit system password (by default, 000000).
NOTE: If using the mouse, right-click and then click  on the Virtual Remote.
2. Press the MENU
button to open the system menu. Select SYSTEM and press the ENTER
button. The System menu opens.
3. Select the TIM
E tab.
4. Select DA
TE and enter the date (yyyy/mm/dd).
5. Select TIME and
enter the time (hh/mm/ss).
NOTE: If using the mouse, use the Virtual Keyboard to enter the date and time.
6. Press the ENTER
button to save your changes.
7. Press the Canc
el button on the front panel, or press the ESC button on the virtual remote to
exit to the Live viewing window.
8. Press press the  butt
on on the remote control to resume Continuous Recording.
NOTE: If using the mouse, right-click and then click  on the Virtual Remote.
NOTE: Ensure the REC symbol appears on the top-left corner.If you do not see the REC symbol,
the DVR has stopped recording.
All recording must be stopped on
the system in order to set the time.
Date
Time