Instruction Manual

20
Using the System
To reposition the display channels using a touch screen monitor:
1. Place the main display screen in either a quad display, or in a multi split-scr
een
configuration.
NOTE: Repositioning will not work if the main display screen is in full-screen single channel.
2. Press and hold inside the channel you would like to move. Drag your finger to the channel you
wish
to reassign it to and release.
NOTE: If the Virtual Remote appears while doing this, you may ignore it. After repositioning the
channel, tap anywhere outside the Virtual Remote to exit.
Press and hold inside channel 3 and drag your finger
to move channel 3 to the channel 1 position.
Channels repositioned
Channel 3 is now in the channel 1 position.