Instruction Manual

33
Setting up Motion Recording
SETTING UP MOTION RECORDING
Motion recording allows the system to mark events as motion recording. This allows you to search
for footage that only has movement.
Step 1: Configure Camera motion sensitivi
ty & Configure Event frame rates
1. Press the MENU
button on the remote or front panel to open the main menu.
• If using a mouse, right-click to ope
n the virtual remote, then click MENU.
2. Click CA
MERA.
3. Click the camera number button to select the camera you wish to configure.
4. Click the ( ) button to select the entire screen (selected by default) or click ( ) to
select certain portions of the screen by double-clicking the portions of the scr
een you wish to
enable motion.
5. Beside MOTION LEVEL, press -/+ to adjust the motion sensitivity.
6. Click EN
TER to save your settings.
7. Click RE
CORD>DAY.
NOTE: You
can also click on RECORD> under SCHEDULED USE, select ON. Click the NIGHT tab
and follow the same instructions below.
Click camera button
Motion detection area. Blue areas
indicate that the screen is enabled
for motion recording.
Record
DAY