Instruction Manual

35
Setting up Motion Recording
2. Double-click the days that you wish to enable Motion recording.
3. Configure the following:
• MODE: Cl
ick the +/- buttons to change to apply DAY recording, or NO REC to disable recording.
If you configured DAY recording in Step 1, select DAY.
NOTE: You cannot configure NIGHT recording to have a beginning and end time. However, if
NIGHT recording is chosen, the NIGHT recording parameters still apply to the schedule.
• BEGIN: Ent
er the time you want the scheduled recording to start.
• END: Enter the time you want the scheduled recording to end.
4. Click EN
TER to save your settings.
Final Result
When the camera detects motion, the ( ) symbol appears, and the channel number turns red 

( ). The channel number turns red to indicate alarm
recording. During video search, motion
events will appear as EVENT. If the channel number does not
turn red, then motion recording has
not been enabled. Double-check to see that you have enabled motion recording in Step 1.
Double-click on the day to configure.
The green motion
icon and red channel
icon indicates that
the channel is set up
for motion recording.