Instruction Manual

37
Setting up Motion Recording
Triggering cameras to record during Video Loss
If video loss occurs, the system can trigger secondary cameras to begin recording as an event.
For example, if a vandal attempts to cut the camera wiring, as soon as the cable wire is cut, the
system triggers other cameras to detect as a motion event.
1. Under the DAY EVENT or NIGHT EVENT tab, click ( ) beside the channel that you wish to
configure.
2. Under VLOSS, ensure that whatever channel you ar
e configuring is selected. In this example,
Camera 1 is selected. Select cameras 2 and 3.
3. Click EN
TER to save your settings.
Final Result
When video loss occurs on cameras 2 or 3, camera 1 begins recording as an eve
nt.
Event Edit icon
Select camera 1 and 2
Example