Instruction Manual

42
Using the Main Menu
DAY
Configuring the DAY tab
The DAY tab allows you to configure how the
system will record during DAY re
cording in the
Scheduled recording menu.
To configure the DAY tab:
1. Click the DA
Y tab.
2. Beside the desired channel you wish to
c
onfigure, adjust the following for
Continuous and Event recording:
• Under F/S,
select the frames per second
of the particular channel during DAY
recording.
• Under QUALITY, select the recording
quality during daytime recording.
3. Click EN
TER to save your settings.
DAY EVENT
Configuring the DAY EVENT tab
The Day Event tab allows you to configure how
the
system will record an event if an alarm
trigger, motion or video loss occurs when the
DVR is in "DAY" recording mode. This setting is
used in the SCHEDULE menu, where you can
assign the system to record in "DAY" mode.
To configure the DAY EVENT tab:
1. Click the DA
Y EVENT tab.
2. Configure the following for each channel:
• ALARM: Sel
ect from 1~4 or ALL. This tells
the system to mark the video as an event
when an alarm input triggers for the
selected channel.
• MOTION: Select the camera that you want
to trigger the camera being configured to
record as an event.For example, if you are
configuring channel 2, and enter channel 8
in the MOTION column, this tells the system
that when a video loss occurs in channel 8,
it will also cause channel 2 to record, and
mark the recorded video as an event.
• VLOSS: Set the camera that you want to
trigger the camera you are configuring to
record, when the camera detects video
loss. For example, if you are configuring
channel 1, and enter channel 8 in the VLOSS
column, this tells the system that when a
video loss occurs in channel 8, it will also
cause channel 1 to record, and mark the
recorded video as an event.
• By default, the VLOSS channels are paired
to each other (i.e Channel 1 has "1" under
VLOSS, Channel 2 has "2" under VLOSS
etc.)
• Indicates multiple devices are
configured (See Event Edit below).
Event Edit icon