Instruction Manual

50
Using the Main Menu
EMAIL
The DVR can send out email notifications when
a motion or alarm event occurs.
To use the Digimerge email server
(r
ecommended):
1. Beside USE, select DEF
AULT.
2. Configure the following:
• EV
ENT: Select how frequent you want the
system to send out email alerts. Note that
the system only sends out a email
notification if there is an event trigger (i.e.
motion or alarm trigger).
• Log : Select how long the system logs
should be (select from 1 day or 1 week).
• Retry Count: Enter the number of times
the system attempts to re-send the email
notification.

• Log (Email Sour
ce): Select the Log
checkbox if you want the system to email a
system log.
• Attach Picture: Select ON for the system
to attach an image in the email alerts.
• Email Address: Enter up to 5 email
addresses that will receive email
notifications from the system.
3. Click ENTER t
o save your settings.

• Ev
ent Edit ( ): Click this icon to
configure the type of alarm settings that
will cause the system to send out email
alerts.
Event Edit icon
To configure the EVENT EDIT
(EMAIL) window:
1. Configure the following:
• ALARM IN: Select the alarm in
devices that will cause the
system to send email
notifications if an alarm is
triggered.
• MOTION: Select the channels
that will cause the system to send
email notifications if motion is
detected.
• SYSTEM: Select the events that
will cause the system to send out
email notifications. For a list of
icons and what they mean, see
the next page.
• Click ENTER to save your
settings.
