Instruction Manual

53
Using the Main Menu
DEVICE
Configure Alarm Out, Alarm Buzzer,
and alarm input settings.
GENERAL
The GENERAL tab allows you to configure Post
Recording time, Audio recording, Key Tone
(key "beeps"), and Key Sensitivity.
1. Configure the following in the General tab:
• DIS
PLAY: Select the output resolution.
• AUDIO RECORD: Select ON or OFF to
enable or disable audio recording.
• KEYPAD MODEL: Select the PTZ keyboard
model and baud rate.
• EXTENDED DEVICE: Select the desired
device
• PTZ EVENT: Select the duration of a PTZ
event.
• ALARM OUT: Select the duration of an
alarm out event.
2. Click EN
TER to save your settings.
ALARM
The ALARM tab allows you to configure the
system Alarm Buzzer and Alarm Input type on
each channel (i.e. N.O and N.C (normally open
and normally closed) settings)).
1. Configure the following in the Alarm tab:
• INPUT: Sel
ect the alarm type connected to
the particular channel. Select from N.O or
N.C (Normally Open, or Normally Closed).
• OUTPUT: Select N.O (Normally Open) or
N.C (Normally Closed). Under INACTIVE,
select the event type (Manual or Event).
• BUZZER:Select ON/OFF. Under INACTIVE,
select the event type (Manual or Event).
• CONTROL: Turn the OUTPUT/ BUZZER on
or off. To enable the ON button , under
INACTIVE select MANUAL.
2. Click ENTER t
o save your settings.