Instruction Manual

54
Using the Main Menu
3. Click the EDIT EVENT icon( ) beside
OUTPUT/BUZZER to configure the actions
that
follow when an alarm output occurs /
buzzer. The alarm output must be set to
N.C or N.O before you can access the Edit
Event window.
4. Configure the following in the EVENT EDIT
(ALARM OUT 1)
Window:
• ALARM I
N: Select the other alarms that
will also trigger when Alarm OUT 1/
BUZZER activates.
• MOTION: Select the cameras that will
cause ALARM OUT 1/BUZZER to activate
when motion is detected.
• VLOSS: Select the cameras that will cause
ALARM OUT1/BUZZER to activate when
video loss occurs in one of the cameras.
• SYSTEM: Select the events that will cause
ALARM OUT 1/BUZZER to activate.
5. Click EN
TER to save your settings. Press
CANCEL/ESC to close remaining menu
windows.
PTZ EVENT
The PTZ Event menu allows you to configure
the PTZ camera to go to a pre-defined pre-set
or tour setting when an event occurs. For
example, if camera 1 detects movement, the
PTZ camera (camera 2) will automatically pan
towards the front door.
To configure the PTZ Event tab:
1. Configure the following:
• CHANNEL: Sel
ect the channel number the
PTZ camera is connected to.
• ACTIVE: This setting instructs what action
the PTZ camera performs when an event
occurs. Select from NONE, GOTO or TOUR.
• In the number field, enter the GOTO or
TOUR preset number. This number is
programmed into the PTZ by the user.
• INACTIVE: This setting instructs what
action the PTZ camera performs after an
event has ended. Select from NONE, GOTO,
or TOUR.
• In the number field, enter the GOTO or
TOUR preset number. This number is
programmed into the PTZ by the user.
Edit Event icon