Instruction Manual

55
Using the Main Menu
2. EDIT EVENT ( ): Click this icon to
open the PTZ EVENT EDIT window. This
all
ows you to configure the type of events
that will trigger the PTZ camera.
3. Configure the following:
• ALARM I
N: Select the alarms that triggers
the PTZ camera to move to a pre-defined
location when the Alarm Input triggers.
• MOTION: Select the cameras that triggers
the PTZ camera to move to a pre-defined
location when the cameras detect motion.
• VLOSS: Select the cameras that cause the
PTZ camera to move to a pre-defined
location when Video Loss occurs on the
selected cameras.
4. Click EN
TER to save your settings.
Alarm recording will take priority over
con
tinuous recording, even if a camera is
disabled in standard recording parameters.
TIP!
If an alarm is triggered on
the system, press the
Cancel/ESC button to
cancel the buzzer (if
enabled). Cancelling the
buzzer
will not stop
recording.