Instruction manual

21
Web Configuration
3. Under Download unsigned ActiveX controls, click Prompt
(recommended) or Enable.
Select Enable or Prompt under
Download unsigned ActiveX controls
Click OK
4. Click OK. Click OK again to save changes.
Step 2 of 2: Log into camera:
1. Connect the ca
mera to your local network and find the camera’s IP
address. See “4. Finding the Camera’s IP Address” on page 9.
2. Enter the camera’s IP address in the addr
ess bar in the following format:
http://192.168.0.120:80
IP address
Colon
HTTP port number
http://
NOTE: You can also connect to the camera using a DDNS address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on page 13 for details).
3. Under User Name and Pa
ss
word, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login