Instruction manual

Remote Firmware Upgrade
21
To perform a firmware upgrade over the LAN or Internet, a Config Tool is provided on the
CD or www.flirsecurity.com/pro. In an effort to continuously improve the functionality of our
products, firmware upgrades are available as a free download on our website, as they are
released.
Note
The Config Tool is supported on PC only. You may also upgrade the firmware using the system’s local
menus (see 14.1.4 Version (Updating Firmware), page 28).
21.1 Installing a Firmware Upgrade Over the LAN
Prerequisites:
• Connect your NVR or IP camera to a router or switch on your network.
• Download a firmware upgrade from www.flirsecurity.com/pro, if one is available. Extract
the contents.
To perform a firmware upgrade over the LAN:
1. Download the Config Tool from www.flirsecurity.com/pro.
2. Extract the contents into a folder.
3. Open the folder and right-click ConfigTool.exe and select Run as administrator.
Note
If a Windows Firewall warning appears, click Allow Access.
The Config Tool scans your LAN for NVRs and IP cameras.
Note
Firmware versions are different between NVRs and IP cameras.
4. Click Upgrade.
#; r. 1.0/11603/11605; en-US
114