Instruction manual

Remote Firmware Upgrade21
5. Configure the following:
1
2
3
5.1. Check any NVRs or IP cameras you would like to upgrade.
5.2. Click Open. Select the upgrade firmware file (.bin).
5.3. Click Upgrade. Wait for the upgrade to complete. Do not power off the system or disconnect
the power cable during upgrade. The system will restart when the upgrade is complete.
21.2 Installing a Firmware Upgrade Over the Internet
Prerequisites:
• Port forward the Client Port (default: 35000) on the system’s local router.
• Obtain the public IP address of the system.
• Download a firmware upgrade from www.flirsecurity.com/pro, if one is available. Extract
the contents.
To perform a firmware upgrade over the Internet:
1. Download the Config Tool from www.flirsecurity.com/pro.
2. Extract the contents into a folder.
3. Open the folder and right-click ConfigTool.exe and Run as administrator.
4. Click Login.
5. Under IP Address, enter the public IP address of the system. Edit the User Name,
Password, or Port if these have been changed from the default values.
6. Click Login. The Config Tool logs in to the system.
#; r. 1.0/11603/11605; en-US
115