Instruction manual

-15--14-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
•
When the CAM TITLE is OFF no title will be displayed on the monitor even if you
had previously setup a name. This is the master display setting.
Notes
2. Press ENTER to access the submenu for ON setting. Here you will be able
to enter the camera title.
3. Press left/right/up/down buttons to select a letter/number/symbol and press
ENTER to conrm selection. Repeat steps until camera title is completed and select
'POS' to select on-screen location for title and 'END' to save title. You can enter up
to a maximum of 15 characters.
• If you move th e cursor to CLR and press the ENTER , all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press
ENTER. Move the cursor over the letter to be edited, move the
cursor to the letter to be inserted and then press the ENTER.
Notes
CAM TITLE
0123456789
ABCDEFGHIJK
LMNOPQRSTUV
WXYZ
()
¯-_■/=&:~,.
  CLR POS END
• Only English is available in this mode for camera title.
• Only max 15 characters for the title allowed.
D-EFFECT: Applies digital effects to camera image.
1. Highlight 'D-EFFECT' in the SPECIAL setup menu.
Digital Zoom can range from 1x to 32x. Too much digital zoom will result in blocky image
Pan / Tilt range is -100 to 100.
2. Press ENTER to access the submenu.
3. FREEZE: Freezes current image displayed
4. MIRROR: MIRROR will mirror the image.
V-FLIP, will ip the image vertically.
ROTATE, will vertically ip and also mirror.
OFF, no image effect applied.
5. D-ZOOM: Allows digital zoom and position to be set.
FREEZE OFF
MIRROR OFF
D-ZOOM OFF
NEG.IMAGE OFF
RETURN RET
SPECIAL
1. CAM TITLE OFF
2. D-EFFECT
3. MOTION OFF
4. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN END
D-EFFECT
D-ZOOM x 1.0
PAN ----|---- 0
TILT ----|---- 0
RETURN RET
D-ZOOM
Notes