Instruction manual

Speed Dome Camera Instruction Manual 9/49

Main Part Description

IP Switc

Dome Cover

Sensor I/O Port (I/O Model)

Main Connector

Mounting Hook

Mounting Screw Hole

z Dome Cover Do not detach the protection vinyl from the dome cover before

finishing all the installation process to protect the dome cover from

scratches or dust.

z DIP Switch Used to set up camera IDs and protocols.

z Mounting Hook Used to assemble the main body with wall mount bracket or

ceiling mount bracket. Insert the mounting hooks into the holes on

the surface of the main body and turn the main body.

z Mounting Screw Hole Used to assemble the main body with a bracket with screws.

z Main Connector Used for the power wire, the video cable and the RS-485

communication cable connection.

z Sensor I/O Port Used for the sensor in/out connection. (The sensor I/O function

possible models only)

INTRODUCTION