Instruction manual

3. Program and Operation
3.3 System Setup Menu
: move joystick up and down to select items.
[Open]/ [Near]: move joystick right to open sub-menus.
[Close]/ [Far]: move joystick to cancel or to exit current menu (back).
3.3.1 System Information
The system Information displays model name/Version/Protocol/Communication Type/
Camera ID No./System. This information is for reference only, you cannot change settings through
the System Information screen. Use the following steps to display the System Information screen.
- Enter into {Main Menu}.
- Select {System Setup} using the joystick [
].
- Select {Info} using the joystick ].[
- Press [Far] button to return to the System Setup menu.
17
SYSTEM SETUP
INFO.
REBOOT
INITIALZE
PASSWORD
EXIT
3.2.2 Editing TITLE
The Title edit menu can be used in the setup titles for Presets, Patterns, Tours, and Scans.
- Select {Title} in the appropriate menu and move the joystick to the right.
- Move the joystick right, left, up or down to select a character.
- Press [Tele] button to input a character and [Wide] button to cancel the character.
- When the label is completed, use [Near] or use the joystick to save the selected title.
- If you want to cancel the selected title, return to the previous menu using [Far] button.
TITLE
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789/+-=;?#.,"~0
SELECT : (MOVE)
SET/CLEAR: (TELE/WIDE)
SAVE : (NEAR)
EXIT : (FAR)
: move joystick left and right to change settings.
X23(X30) MINI SPEED DOME
V x.xx.xx
RS485/2400
ID001
NTSC