Instruction manual

3. Program and Operation

3.3.2 Reboot

Reboot the system if operation becomes unstable or encounters errors.

Rebooting the system will turn the camera on and off without changing settings.

- Enter into {Main Menu}

- Select {System Setup} then {Reboot} using the joystick.

- To {Reboot} the system, press the [Near] key.

- To cancel, press [Far] key.

3.3.3 Initialize

Use initalize to reset settings to factory defaults.

- Enter into {Main Menu}

- Select {System Setup} and select {Initalize} using the joystick [ ].

- Select items to be initialized by highlighting them and then move the joystick right to select {Clear}.

- Press [Open] button to initalize selections and select [Near] to continue. Press [Far] to cancel.

[ALL]: Clear All saved items (CAM/PRESET/TOUR/PATTERN/SCAN)

[CAM]: Clear Camera related settings.

[PRESET]: Clear saved Presets. (To clear individual presets, refer to PRESET Menu)

[TOUR]: Clear saved Tours.

[PATTERN]: Clear saved Patterns.

[SCAN]: Clear saved Scan items.

[ETC]: Clear other setting value except items of Camera & PTZs

(CAM status and saved data of PRESET, TOUR, PATTERN and SCAN)

REBOOT

CONTINUE?

YES : NEAR

NO : FAR

INITIALIZE

ALL : NO CLR

CAM : NO CLR

PRESET : NO CLR

TOUR : NO CLR

PATTERN : NO CLR

SCAN

ETC

: NO CLR

SAVE : OPEN

BACK : CLOSE