Instruction manual

3. Program and Operation
3.5.5 Advanced Setup
The Backlight Compensation function increases the brightness of the overall screen to compensate
for a loss of dark detail when subjects are shot in a backlit environment.
Sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening
the edges in the picture.
- Enter into {Main Menu}
- Select {Camera Setup} and then select {Advanced} using the joystick[
].
- Highlight {Sharpness} and adjust the sharpness level as needed.
- Highlight {Backlight} and select On/Off to enable/disable Backlight Compensation.
- Press [Open] button or use joystick to save settings
- Press [Close] button or use joystick to return to previous menu without saving changes.
3.5.6 WDR/DNR Setup
When both high-brightness subjects and low-brightness subjects have been shot at the same
time, overexposure in the high-brightness subjects or loss of dark detail in the low-brightness
subjects may occur. The WDR (Wide Dynamic Range) function creates images free from over-
exposure or loss of dark detail by combining two images after tripping the shutter for a long
exposure time and for a short exposure time in one
DNR (Digital Noise Reduction) can be set between 0 and 15. When gain level is higher,
DNR will reduce the noise to make the image clearer.
eld.
- Enter into {Main Menu}.
- Select {Camera Setup} and then select {WDR/DNR} using joystick
].
- Highlight {WDR Setup} and select On/Off to enable/disable Wide Dynamic Range.
- Highlight {WDR Level} and adjust as needed.
- Highlight {DNR Setup} and select On/Off to enable/disable Digital Noise Reduction.
- Highlight {DNR Level} and adjust as needed.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu without saving changes.
24
ADVANCED SETUP
SHARPNESS : 10
BACKLIGHT : OFF
SAVE : OPEN
BACK : CLOSE
WDR/DNR
WDR SETUP : OFF
WDR LEVEL :
DNR SETUP : OFF
DNR LEVEL :
SAVE : OPEN
BACK : CLOSE