Instruction manual

3. Program and Operation
3.6.4 Calibration Setup
- Enter into {Main Menu}.
- Select {Dome Motion} and then select {Calibration} using the joystick [ ].
- Highlight {Auto Cal} and select Auto for Auto Calibration or Manual for Manual Calibration.
When Auto Calibration is selected the camera will automatically calibrate when errors are detected.
When Manual Calibration is selected, you must manually initiate the calibration process. To
manually calibrate the camera, select {Calibration} using the joystick [ ] and press [Near] to confirm.
- Highlight {Error Msg Disp} and select On/Off to enable/disable OSD messages when errors are
detected.
- Press [Open] button or use the joystick to save settings.
- Press [Close] button or use the joystick to return to the previous menu without saving changes.
3.7 Preset Setup
/ : move joystick up and down to select items.
/ : move joystick left and right to change settings.
/ [Open]/ [Near]: move joystick right to enter sub-menus.
/ [Close]/ [Far]: move joystick to cancel or to return to previous menu without saving changes.
27
CALIBRATION SETUP
AUTO CAL : AUTO
ERROR MSG DISP : OFF
CALIBRATION
SAVE : OPEN
BACK : CLOSE
CONTINUE?
YES : NEAR
NO : FAR
PRESET SETUP
NO. 001 : NOT USED
EDIT :
TITLE :
D TIME :
CLEAR
SAVE : OPEN
BACK : CLOSE
Calibration allows you to correct Pan/Tilt control errors.
The camera can have up to 210 preset positions. Preset positions include Pan/Tilt/Zoom setting.