Instruction manual

3. Program and Operation
Use the following steps to program a Pattern.
- Enter into {Main Menu}.
- Select {Pattern Setup} using the joystick [ ].
- Highlight {No.} and select the number of the pattern you would like to edit.
- Select {Edit} to edit the pattern. Use the joystick to move to the desired start position and press
[Near] to start programming the pattern. Move the joystick to program the pattern and press
[Near] when finished to save the pattern.
- Select {Title} to create a Pattern Title (Optional). See [3.2.2 Editing Title] for details.
- Press [Open] or use the joystick to save settings.
- Press [Close] or use the joystick to return to the previous menu without saving changes.
Note: Select {Clear} to clear the selected Pattern. Time refers to the duration of the pattern.
Patterns cannot be longer than 60 seconds.
3.9 Tour Setup
/ : move joystick up and down to select items.
/ : move joystick left and right to change settings.
/ [Open]/ [Near]: move joystick right to enter sub-menus.
/ [Close]/ [Far]: move joystick to return to previous menu without saving changes.
The camera can save up to 8 tours, with up to 28 items (Preset, Pattern, or Scan) each.
* Notice:
In order to call an action (Preset, Pattern or Scan), you must save the action first.
29
PTIME: 022
START POSITION SETUP
PATTERN SETUP
PRESS MOVE KEY
START : (NEAR)
SAVE : (NEAR)
EXIT : (FAR)
TOUR SETUP
NO. 001 : NOT USED
... ... ... ... ... ... ...
... ... ... ... ... ... ...
... ... ... ... ... ... ...
... ... ... ... ... ... ...
CLEAR
SAVE : OPEN
BACK : CLOSE
- CHANGE ID : (TELE/WIDE)
- CHANGE ACTION : (NEAR)
PATTERN SETUP
NO.001 : NOT USED
EDIT :
TITLE :
TIME :
CLEAR
SAVE : OPEN
BACK : CLOSE
- Enter into {Main Menu}.
- Select {Tour Setup} using the joystick [ ].
- Highlight {No.} and select the number of the tour you would like to edit.
- Move the joystick to select items in the tour. Select saved actions by pressing [Tele/Wide].
Change the action type by pressing [Near].
- Press [Open] or use the joystick to save settings.
- Press [Close] or use the joystick to return to the previous menu without saving changes.
Note: Select {Clear} to clear the selected Tour.