Hardware manual

- 12 -
T
ALK
M
ASTER
P
REFERENCES
Ping Interval
Intercoms on the system are contacted at intervals ranging from
5 to 90 seconds. In large systems, this interval can be set to the
maximum amount to limit network traffic.
Audio Volume
Intercom volumes are adjustable
at the intercom and can also be
controlled using the volume slider.
Use beep tones at start and
end of incoming calls
By default, a short audio tone is
generated to indicate the stop and
start of a user's call. This feature
provides a convenient method for
indicating microphone transmission
state to the remote party.
Hide when minimized
Use this option to hide TalkMaster in the Windows status bar.
TalkMaster will continue to be visible in the system tray (near the
PC clock icon).
Start Up Audio Message
All intercoms produce a signal when they are initially connected
to TalkMaster. This can be either a short signal tone "beep" or a
pre-recorded audio wave file.
 Language Choose from several international languages. Use drop down
dialogue to choose the pre-installed language or create a custom
announcement using a "User Defined" file.
 Speak Message Check to enable playback of the selected language file
 Short Beep Check to disable audio language playbacks with a short beep.

Generate local page on remote intercom ""+"" keypress
Select to enable remote intercom paging to the server PC
running TalkMaster. When checked, ALL intercoms on the system
will play a local wav file (normally a beep or alert tone).
Network Audio Adjust
Advanced setting used to adjust transmission latency (delay).