Specifications

Upgrade to New Control Board
ADDvantage-32 PLUS ● AC to DC Power Converter
12-11
6 The B20726-1 ribbon cable removed in step 4 will be reinstalled. One side of the
cable plugs into connector J4 on the bridge interface board and routes across the back
of the drive cover and through the slot into the electronics enclosure. The position
and routing of the B20726-1 cable is shown in Figure 12-7.
Figure 12-7. The B20726-1 ribbon cable is installed in connector J4 of the bridge
interface board and is routed across the drive cover.