Specifications

Tune Up Procedure
1. RX Gain Calibration
a. Put DUT in test mode
b. Put DUT in BCH mode
c. Put DUT in selected channel band
d. Total gain chain calibration at center ARFCN
e. Frequency Ripple calibration
f. Complete RX_AGC Gain table
2. TX Power Calibration
a. Put DUT in test mode
b. Put DUT in BCH mode
c. Put DUT in selected channel band
d. Total gain chain calibration at center ARFCN
e .Frequency Ripple calibration
f .Complete TX_APC Gain table
3. AFC calibration
a. Put DUT in test mode
b. Put DUT in selected channel mode
c. Calibration AFC at center ARFCN
d. Complete AFC result table