User`s manual

15
6. RECALLING FILTER CONFIGURATIONS
6.1 Open File Dialog Box
Application:
To save time configuring control settings in the MicroDAC IV control settings, complete setups
previously stored may be recalled from disk files with a few simple mouse clicks.
Open a setup from a disk file as follows:
1. Click on File on the MicroDAC IV menu bar. When the pulldown menu appears, click on
Open (or click on the "open file folder" icon on the toolbar). This will cause the following
window to appear:
Figure 6-1: Open Setup File Window
2. If you desire to open the setup file from a different drive (such as a floppy drive) or
directory, use the Look in selection box. If you select a drive that is not ready, an error
message will be generated.
3. Once the desired setup file name has been found, either double-click it or click on Open
to recall it. The file will then be loaded.