Operating instructions

382 South Abbott Ave, Milpitas, CA 95035, USA • www.nuforce.com • EMAIL: [e-mail]
Allow for a minimum 10 cm or 4 inches of unobstructed clearance around the unit. Do not
place the unit on a bed, sofa, rug, or similar surface capable of blocking ventilation openings.
If the unit is placed in a bookcase or cabinet, allow for proper ventilation. Keep the
component away from radiators, heat registers, stoves, or any other appliance that produces
heat.
The unit must be connected to a power supply only of the type and voltage specified on the
rear panel.
Connect the component to the power outlet only with the supplied power supply cable or an
exact equivalent. Do not modify the supplied cable.
Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or
damaged in any way. Pay particular attention to the power cord at the plug and where the
cord exits the back of the unit.
The power cord should be unplugged from the wall outlet during a lightning storm or if the
unit is to be left unused for a long period of time.
Immediately stop using the component and have it inspected and/or serviced by a qualified
service agency if:
 The power supply cord or plug has been damaged.
 Objects have fallen or liquid has been spilled into the unit.
 The unit has been exposed to rain.
 The unit shows signs of improper operation.
 The unit has been dropped or damaged in any way.