Technical data

www.asti-usa.com ASTi DACS: Operation & Maintenance Manual (Version 4, Rev. B.1)

MiniDACS: JUKI-3711PTN BIOS Settings

This document provides BIOS settings for the JUKI-3711PTN for use as an ASTi system. After

completion, please refer to the ASTi Cold Start Procedure for instructions on installing OS and

other ASTi related software.

The settings and steps are listed below:

1.Press DEL on power up to enter Setup.

2.Load Fail-Safe Defaults -- no need to reboot.

3.Under each category, set the following settings:

Note: All systems may not have all menus.

• Standard CMOS Setup

Halt on: No Errors

A Drive: 1.44 MB

• Advanced BIOS Features

Virus Warning: Disabled

First Boot Device: Floppy

Second Boot Device: HDD-0

• Power Management

ACPI: Disabled

• PNP/PCI Conﬁg

Resources Controlled By: Manual

• IRQ Resources

IRQ10: Legacy ISA

4.Save and Exit Setup