Technical data
ASTi DACS: Operation & Maintenance Manual (Version 4, Rev. B.1) www.asti-usa.com
44 Copyright © 1999-2006 Advanced Simulation Technology inc.
Preventative Maintenance
Very little preventative maintenance is required for the DACS. The following sections provide
preventative maintenance information.
Filter Cleaning
Once each month (or more often if dust build up occurs) inspect the fan filters for excessive dust
and dirt. Filters should be kept clean to help prevent heat buildup within the DACS.
• To clean the filters:
• Power down the DACS.
• Remove all fan covers.
• Remove foam filters and wash with a mild detergent and rinse. (In some cases vacuuming
the filter may also be sufficient.)
Thoroughly dry and replace filters.
Software Backup
As with any computer system, it is recommended that you back up your DACS Model Processor
hard disk on a regular basis. Your DOS operating system provides a convenient backup utility for
backing up files. Consult the DOS documentation supplied with the system for more information.
Commercial backup utilities can also be purchased for use with the DACS.
If the size of your backup becomes large, such as in the case where large record/replay files are
created, it is recommended that a commercial tape back up system be used to back up your Model
Processor hard disk.
Consumables
ASTi equipment uses no consumables.










