Technical data

ASTi DACS: Operation & Maintenance Manual (Version 4, Rev. B.1) www.asti-usa.com

• IMPORTANT! For proper Model Builder operation, verify you have the correct Software

Protection Key Disk by comparing the system serial number (located on the back of the

chassis) with the serial number printed on the disk. Follow the installation instructions

below.

Insert the Software Protection Key code Disk in the A: drive.

Change to the A: drive and

Type ‘install’

NOTE: This process installs the correctly coded software options file in the C:\MBUILDER\BIN direc-

tory. Multiple options files may be installed in order to support removable drives across many platforms.

• Reboot the system and examine the Errors page in the Model Builder software environment.

There should be no error message indicating missing or invalid options key.