Technical data

ASTi DACS: Operation & Maintenance Manual (Version 4, Rev. B.1) www.asti-usa.com

MiniDACS: JUKI-3711PT BIOS Settings

This document provides BIOS settings for the JUKI-3711PT for use as an ASTi system. After

completion, please refer to the ASTi Cold Start Procedure for instructions on installing OS and

other ASTi related software.

The settings and steps are listed below:

1.Press DEL on power up to enter Setup.

2.Load Setup default -- no need to reboot.

3.Under each category, set the following settings:

Note: All systems may not have all menus.

• Standard CMOS Setup

Halt on: No Errors

• Advanced BIOS Features

First Boot Device: Floppy

Second Boot Device: HDD-0

• Power Management

ACPI: Disabled

• PNP/PCI Conﬁg

Resources Controlled By: Manual

• IRQ Resources

IRQ10: Legacy ISA

4.Save and Exit Setup