User`s manual

Page 11
5 MicroDAC 5 Configuration Utility Overview
5.1 Introduction
The MicroDAC 5 Configuration Utility allows for complete setup and intuitive,
interactive control of all the audio processing on the MicroDAC 5, via USB
connection between the hardware and a Windows®-based PC.
The software can be used to control the MicroDAC 5 unit in real time. Once you
have decided on the appropriate settings for your target audio, all processing
settings can be saved in nonvolatile memory on the MicroDAC 5 for stand-alone
operation without the computer connection. In addition, favorite configurations
can be saved on the PC and subsequently recalled.
5.2 Main Screen
An image of the main window for the MicroDAC 5 Configuration Utility is shown
below in Figure 5-1. The signal diagram represents the flow of the audio signal
going from left to right. On the right hand side, you can select which filters you
want in the signal chain and the system bandwidth.
Figure 5-1: Main Configuration Utility Screen