User`s manual

Page 44
9. Next, before running the MicroDAC 5 software, attach the MicroDAC 5
hardware to your computer via the included USB cable, and turn on the
unit. After a few moments, the computer will begin installing the required
drivers. This will happen automatically, with notification balloons
indicating the status.
Figure 7-19: Installing drivers
Figure 7-20: Driver installation complete
10. Now your MicroDAC 5 is ready for use! To start using your MicroDAC 5,
connect the MicroDAC 5 unit to the PC, turn it on, and double click the
“MicroDAC 5” icon on your desktop.