User guide

LIVEMIX MIX-16/32
7
LIVEMIX SYSTEM OVERVIEW
There are three components required to make a Livemix system. Each system will have either an
analog or digital input unit, a central mixer unit, and at least one attached control surface.
Input Options
Users with analog source material will use the AD-24. Using the TRS or DB-25 inputs, audio from the
source material is made available to the Livemix system.
Users with digital source material will use the Dante Option Card (LM-DANTE-EXP). This is an option
card that is installed in the MIX-16 and allows the Livemix system to receive audio from a Dante
based network.
Central Mixer Options
The Livemix Central Mixer processes and distributes digital audio and power to connected Control
Surfaces. Control up to 16 personal mixes with the Livemix MIX-16.
Control Surface
Livemix needs at least one connected controller to make a mix. Livemix Bundles (both Analog and
Digital) come with 4 Livemix CS-DUO units for a total of 8 personal mixes. Each Livemix CS-DUO
connects via network cable to one of the ports of the MIX-16. Using various controls on the unit, two
users can each create their own custom mix, which is then output to headphones, in-ear monitors or
stage monitors, right from the CS-DUO unit.