Quick Installation Manual EAP280-L Packing List AP(1) Mounting Kit(1) Mounting Plate(1) Expansion Tube(3) ST4.
Equipment Installation Preparing for Installation Before installation, installation personnel must take the necessary safety measures to ensure personal safety Do not put AP and Tool on walkways to avoid damage Device support wall mounting and ceiling mounting,make sure the ceiling and walls can bear safety before installation Installation may need tools listed on the below picture.
Ceiling Mount Attention Ceiling mount need to use screws which is 30mm long. It is suitable for 15 mm thick ceiling. When need to use for thicker ceiling, customers need to prepare for longer screws. Warning Ceiling mount need to use covert security installation to prevent AP take off from the mount. ≤15mm 1 1 2 3 2 3 Take down the ceiling and use 4mm drill to open two hole on ceiling. The distance between two hole is 40mm. Use locking slide to screw up sheet metal mount and ceiling.
FCC Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EAP280-L Indoor Wireless AP
EAP280-L EAP280-L AC are deployed, the APs will be unable to operate normally when the wireless AC is down and then the entire wireless network will crash. DCN wireless APs support an automatic emergency mechanism. This mechanism enables an AP to intelligently detect links. When detecting that the wireless AC is down, the AP quickly switches its operating mode so that it may continue to forward data while enabling new users to access the network.
EAP280-L ► Intelligent load balancing mechanism In general, a wireless client will select an AP according to the signal strength of APs. When this uncontrolled access mode is applied, however, a large number of clients could be connected to the same AP simply because the AP provides strong signals. As more clients are connected to an AP, the bandwidth available to each client will be smaller, thereby greatly affecting user experience of the clients.
EAP280-L ► Real-time spectrum protection DCN smart APs support a built-in RF collection module that integrates RF monitoring and real-time spectrum protection. By implementing communications and data collection through the respective AP, the RF collection module performs wireless environment quality monitoring, wireless network capability tendency evaluation, and unexpected-interference alarms.
EAP280-L Software Specifications Item WLAN 11n enhancements Feature EAP280-L Product positioning Indoor single-frequency Working frequency band 2.
EAP280-L Item Security Forwarding Feature EAP280-L Encryption 64/128 WEP, dynamic WEP, TKIP, and CCMP encryption 802.
EAP280-L Item QoS Management Feature EAP280-L WMM Yes Priority mapping Ethernet port 802.