User's Manual

f
EAP280-L
Item Feature EAP280-L
QoS
WMM Yes
Priority mapping
Ethernet port 802.1P identication and marking
Mapping from wireless priorities to wired priorities
QoS policy mapping
Mapping of different SSIDs/VLANs to different QoS policies
Mapping of data streams that match with different packet fields to
different QoS policies
L2-L4 packet ltering and ow
classication
Yes: MAC, IPv4, and IPv6 packets
Load balance
Load balancing based on the number of users
Load balancing based on user trafc
Load balancing based on frequency bands
Bandwidth limit
Bandwidth limit based on APs
Bandwidth limit based on SSIDs
Bandwidth limit based on terminals
Bandwidth limit based on specic data streams
Power saving mode Yes
Automatic emergency mechanism of
APs
Yes
Intelligent identication of terminals Yes
Multicast enhancement Multicast to unicast
Management
Network management Centralized management through an AC; both t and fat modes
Maintenance mode Both local and remote maintenance
Logging Local logs, Syslog, and log le export
Alarming Yes
Fault detection Yes
Statistics Yes
Switching between the fat and fit
modes
AP working in t mode can switch to the fat mode through a wireless
AC; AP working in fat mode can switch to the t mode through a local
control port or Telnet.
Remote probe analysis Yes
Dual-image (dual-OS) backup
mechanism
Yes
Watchdog Yes
Ordering Information
Product Model Description Remarks
EAP280-L
802.11n indoor wireless AP, provides an access bandwidth up to 300 Mbps
(2.4 GHz single-channel single-frequency, built-in antenna, 802.3af PoE)
(PoE module need to be separately purchased.Don’t support local power)
Mandatory
DCWL-PoEINJ-G+ 10/100/1000 Mbps 1-port 802.3at PoE module Optional
Contact us
Digital China Networks Limited
For more detail information about DCN product, contact:
URL: http://www.dcnglobal.com
Email: [e-mail]
Address: Digital Technology Plaza, NO.9 Shangdi 9th Street, Haidian District, Beijing, China