User's Manual

Receiver
30 DigiTrak
®
F5
®
Operator’s Manual
Setting the Date
The date function displays the date by month/day/year.
To Set the Date:
1. Ensure the calendar is the active function (yellow-orange) on the keypad. If necessary, toggle to
highlight it and pull the trigger to select it. The display window on the keypad will change to show
a date format.
2. Enter the date one digit at a time (month, then day, then the last two digits of the year) left to
right. For example to set the date to January 2
nd
of 2011 (01/02/11):
- Toggle to highlight the “0” then pull the trigger to select it.
- Toggle to highlight the “1” then pull the trigger to select it.
- Toggle to highlight the “0” then pull the trigger to select it.
- Toggle to highlight the “2” then pull the trigger to select it.
- Toggle to highlight the “1” then pull the trigger to select it.
- Toggle to highlight the “1” then pull the trigger to select it.
3. Confirm the date reads as desired.
4. Toggle to highlight the return arrow and pull the trigger to select it.
The confirmation tone will sound as the screen returns to the settings menu.
Telemetry Channel Menu
The telemetry channel menu has five telemetry setting options (1, 2, 3, 4, and 0) and an exit button. The
current setting is automatically highlighted for selection when the telemetry channel menu is accessed.
Selecting the exit button will return the screen to the settings menu with no change to the telemetry
channel setting. Selecting “0” will turn off the telemetry function.
For communication to occur between the receiver and remote display, both devices must be set to the
same telemetry channel.
To set the telemetry channel on the receiver, use the toggle switch to highlight the desired telemetry
channel in the telemetry channel menu then pull the trigger. The confirmation tone will sound as the
screen returns to the settings menu.